How To Fix A Top That Is Too Low Cut

Wardrobe malfunctions happen to the best of us. You buy a cute new top online or from the store, try it on at home, and realize it shows a bit more cleavage than you’d like. Don’t despair – with a few quick alterations, you can turn that plunging neckline into a perky peek-a-boo.

If you’re short on time, here’s a quick answer to your question: add darts and tiny pleats along the neckline to raise it or sew in a modesty panel or bib to fill in the gap. Read on for more details on tailoring tricks that will have your neckline sitting just right, with no awkward moments.

Assess the Neckline to Determine the Best Approach

When faced with a top that is too low cut, the first step is to assess the neckline and determine the best approach for fixing it. By carefully examining the neckline, you can pinpoint the specific areas that need adjustment and find the most suitable solutions.

Pinpoint where the neckline dips too low

Start by identifying the exact location where the neckline dips too low. This could be in the center, on the sides, or even at the shoulders. By pinpointing the problem area, you can focus your efforts on finding the most effective solution.

Check if the shoulder seams sit properly

Next, make sure to check if the shoulder seams of the top sit properly. If the shoulder seams are too far out or too close to the neck, it can contribute to a low-cut neckline. Adjusting the shoulder seams can help raise the neckline and provide a better fit.

Figure out if the armholes are too big

In some cases, the armholes of a top may be too big, causing the neckline to dip lower than desired. If this is the case, consider adjusting the armholes to ensure a proper fit. This can be done by either taking in the armholes or adding darts to create a more tailored look.

Pro Tip: If you’re unsure about how to fix a top with a low-cut neckline, don’t hesitate to seek advice from a professional tailor or seamstress. They can provide expert guidance and help you achieve the desired results.

Make Darts to Take In Excess Fabric

If you find that your top is too low cut and you want to fix it, one option is to make darts. Darts are small folds of fabric that are stitched to create shape and remove excess fabric. By adding darts to your top, you can raise the neckline and make it more modest. Here’s how you can do it:

Mark darts on the inside of the garment

Start by turning your top inside out and putting it on. Look in the mirror and determine where you want the new neckline to be. Use a fabric pen or tailor’s chalk to mark where the darts should be placed. These marks will serve as your guide when sewing.

Stitch the darts and press them upwards

Once you have marked the darts, take off the top and lay it flat on a table. Fold the excess fabric along the marked lines, bringing the edges together. Pin the fabric in place to secure it. Using a sewing machine or needle and thread, sew along the marked lines, starting from the widest part of the dart and tapering off towards the edges.

Once you have stitched the darts, press them upwards with an iron to flatten them and give them a polished look.

Try on the top again to see if more darts are needed

After you have completed the darts, try on the top again to see if the neckline is now at the desired height. If you are still not satisfied with the result, you can repeat the process and add more darts.

Take note of any adjustments you need to make and repeat the steps until you achieve the desired fit.

Remember, making darts is a simple and effective way to fix a top that is too low cut. By taking in excess fabric, you can raise the neckline and make the top more modest. Give it a try and see the difference it can make!

Add Tiny Pleats for a Subtle Lift

If you have a top that is too low cut and you’re looking for a quick fix, adding tiny pleats can be a great solution. Not only will it raise the neckline, but it will also add a touch of elegance to your garment.

Pin tiny pleats where you want to raise the neckline

The first step is to determine how much you want to raise the neckline. Once you have decided, carefully pin tiny pleats in the desired area. The number of pleats will depend on the width and depth of the neckline. Make sure to distribute the pleats evenly to achieve a balanced look.

Sew them neatly in place by hand or machine

Once you have pinned the pleats, it’s time to sew them in place. You can choose to sew them by hand or use a sewing machine, depending on your preference and skill level. If you opt for hand sewing, use small and neat stitches to secure the pleats.

If you decide to use a sewing machine, select a stitch that will securely hold the pleats in place.

Press the pleats upwards for a tidy finish

After sewing the pleats, it’s important to give them a final touch to achieve a tidy finish. Gently press the pleats upwards using an iron on low heat. This will help set the pleats and make them look crisp and neat. Be careful not to press too hard or use high heat, as this may damage the fabric.

Adding tiny pleats to raise the neckline is a simple and effective way to fix a top that is too low cut. It allows you to customize your garment to your desired level of modesty while adding a stylish detail.

So the next time you find yourself with a top that needs a little adjustment, give this technique a try!

Insert a Modesty Panel for Coverage

If you have a top that is too low cut and you’re looking for a way to add some coverage, inserting a modesty panel is a great solution. A modesty panel is a piece of fabric that can be added to the neckline of a top to provide more coverage and make it more modest.

This is especially useful if you want to wear the top in a professional or conservative setting, or if you simply prefer a more modest look.

Cut a panel from matching fabric

The first step in inserting a modesty panel is to cut a panel from a piece of matching fabric. This fabric should be similar in color and texture to the top you’re working with, so that it blends in seamlessly.

Use a ruler or measuring tape to measure the width and length of the neckline where you want the panel to be inserted. Then, use scissors to carefully cut the fabric to the desired size and shape.

Pin and hand-stitch along the neckline

Once you have cut the panel, it’s time to attach it to the top. Start by pinning the panel in place along the neckline. Make sure it is aligned properly and covers the desired area. Then, using a needle and thread that matches the color of the fabric, begin hand-stitching the panel to the top.

Take small, even stitches to ensure a secure and neat attachment. Continue stitching all the way around the neckline until the panel is securely in place.

Use flesh-toned fabric if you can’t match

If you’re unable to find a matching fabric for your modesty panel, another option is to use flesh-toned fabric. This can be a good alternative if you have a top with a pattern or color that is difficult to match.

The flesh-toned fabric will blend in with your skin tone and create the illusion of added coverage without being too noticeable. Just make sure to choose a fabric that is comfortable and breathable, so you can wear it with confidence.

Remember, adding a modesty panel is a simple and effective way to fix a top that is too low cut. It allows you to customize your clothing to suit your personal style and preferences, while still maintaining modesty and professionalism. Give it a try and see how it can transform your wardrobe!

Sew in a Bib or Small Ruffle

Having a top that is too low cut can be frustrating and uncomfortable, but don’t worry, there are some simple solutions to fix this issue. One option is to sew in a bib or small ruffle to add coverage and style to your top. Here’s how you can do it:

Make a bib pattern from paper and cut from fabric

To create a bib for your top, start by making a pattern out of paper. Place the paper on your chest and trace the shape you want for the bib. Make sure to leave enough room for it to cover the plunging neckline. Once you have the pattern, transfer it onto your chosen fabric and cut it out.

You can use a contrasting fabric for a stylish look or match it to your top for a more subtle effect.

Attach the bib to fill in the plunging neckline

Now that you have your bib cut out, it’s time to attach it to your top. Use a sewing machine or needle and thread to carefully sew the bib onto the neckline of your top. Make sure to align the edges of the bib with the edges of the neckline, and sew it securely in place.

You can also add some decorative stitches or trim to enhance the look of the bib and make it blend seamlessly with your top.

Or gather fabric into a ruffle to sew on top

If you prefer a more feminine and romantic look, you can gather some fabric into a ruffle and sew it onto the neckline of your top. To do this, cut a strip of fabric that is long enough to go around the neckline and give you the desired amount of coverage.

Sew a gathering stitch along one edge of the fabric and pull the thread to create a ruffle. Then, sew the ruffle onto the neckline, making sure to evenly distribute the gathers.

By sewing in a bib or adding a ruffle, you can easily fix a top that is too low cut. These simple and creative solutions not only provide more coverage but also give your top a unique and stylish touch.

So go ahead and get creative with your sewing skills to transform your low-cut top into a fashion statement!


With some clever sewing tricks, you can instantly fix a top with a neckline that’s too low and risque. Darts, pleats, modesty panels and other subtle alterations will raise the neckline just enough. No more worrying about revealing too much – now you can confidently wear that cute top without any wardrobe malfunctions!

Similar Posts